Explorez les lignes de produits d’Eddyfi Technologies
Surveillance à distance
Générateurs de vapeur nucléaire
Systèmes de vision automatisés
Solutions robotiques
Littérature
-
Notes d'application
- A More Efficient Method of Screening HRSG Tubes for Corrosion
- Addressing Stainless Steel and Dissimilar Metal Weld Inspection with Advanced Phased Array Ultrasonic Techniques
- Aiding Recycled Aluminum Initiatives in Automotive Manufacturing
- Array of Benefits with ACFM® for Tank Car Inspection
- Assessing Buried Aviation Fuel Tanks for Fitness For Service
- Assessing Circumferential Cracking in Non-Ferromagnetic Heat Exchanger Tubes
- Assessing Corrosion and Erosion of Distribution Pipeline Systems in the Primary Aluminum Production Industry
- Assessing Flow-accelerated Corrosion with Pulsed Eddy Current
- Assessing Emulsion Pipelines... in the Digital Age
- Complete Solution for Corrosion Mapping Capital Assets
- Confined Space Ductwork Cleaning with Custom Robotic Crawler
- Corrosion Mapping For High Temperature Onstream Piping Circuits
- Corrosion Mapping in a Cost-Sensitive Climate
- Detecting and Measuring Flaws When It Matters Most in Cast Austenitic Stainless Steels
- Detecting Cracks and Corrosion in Aircraft Longerons
- Detecting Corrosion in Aluminum with Eddy Current Array Technology
- Detecting Flaws in Condenser Tubing Welds with the DefHi Probe
- Detecting High Temperature Hydrogen Attack (HTHA) Before It's Too Late
- Detecting Longitudinal Cracks in Friction-stir Welds With Eddy Current
- Detecting Surface Cracking in Gears to Extend Their Useful Lives
- Effective Thermal Fatigue Cracking Characterization in Pipeline Branch Connections
- Finding Hydroforming-induced Cracks in Pipe Liner Welds
- From Time-based to Condition-based Assessment: ECA in Reformer Tubes
- Fueling Economic Benefits with Remote Removal of Marine Biofouling
- Guided Wave Testing Now Finding a Needle in a Haystack
- High Humidity Poses High Risk For Sweating Pipe Inspection Using The Wrong Method
- High Temperature Corrosion Mapping of In-Service Heat Exchangers with Ultrasonic Scanning Solution
- High Temperature Corrosion Mapping RMS2
- High-performance IRIS Testing of Heat Exchanger Tubes
- High-speed Remote-field Testing in Carbon Steel Tubing with Probot
- How to Access Proactive Train Axle Integrity Insights with Phased Array Ultrasonic Testing
- How to Achieve a Sweeping View of Composite Aerospace Asset Integrity Conditions
- How to Better Assess TY Fillet Welds with Actionable Insights
- How to Better Detect Corrosion in Pipe Elbows
- How to Safely and Efficiently Retrieve Foreign Material from Nuclear Reactor Fuel Pools
- How to Safely Assess Suspect Packages at Sea
- How to Safely Inspect Petrochemical Pressure Vessels Internally
- Improved Phased Array UT Inspection of TKY Joints
- Inspecting Beyond the Curve with IRIS
- Inspecting for Cracks in Austenitic Stainless Steel Welds
- Inspecting for Cracks in Tight Places
- Inspecting for Surface Cracks Through Thick Coatings
- Inspecting In-Service ERW Pipelines with TFM without Slowing Down
- Inspecting In-Service Storage Tank Annular Rings for Corrosion
- Inspecting Lead-clad Pipes with Pulsed Eddy Current
- Inspecting Submarine Hulls for Corrosion
- Inspecting Turbine Dovetails with Eddy Current Array Technology
- Inspection of Welds with Corrosion Resistant Alloy (CRA) Cladding
- Keeping Pressure Vessels Safe with the Sharck Probe
- Keeping The Taps On: On-Stream Integrity Inspection of Utility Pipelines
- Maintaining Data Center Uptime with Optimized Cooling System Assessments
- Mitigating the Cost of Not Knowing in Ships
- Non Intrusive Inspection (NII) Vessels, Pressure Systems and Associated Pipework
- Nozzle Integrity Assessment with Volumetric Inspection Solution
- Paperless Tank Inspection Reporting
- Remote UnderWater Inspection in Lieu of Drydocking (UWILD) with ACFM
- Robotically Deployed Visual and Ultrasonic Testing for Extended Vertical Pipeline Assessments
- Robotizing Eddy Current Array to Find Stress-corrosion Cracks in Stainless Steel Canisters
- Scorpion 2 Robotic Tank Shell Thickness Measurement
- Semi-Automated Condition Monitoring of Pipelines Made Possible
- Sizing Small Volumetric Defects in Fin-Fan Air Cooler Tubes
- State-of-the-Art RFT — Meeting the Ferromagnetic Tube Challenge
- Steam Traction Engine Boiler Inspection Challenge
- Tapping into a Hot Solution with ACFM® for High Temperature Inspections
- The Fast and Reliable Alternative for Orbital Weld Inspection: Eddy Current Array
- Tightening Inspection Standards For In-Service Riser Bolt Inspection
- Turbine Bore and Bolt Hole Inspection Made Efficient with Eddy Current Array
-
Brochures sur les solutions d'application
- ACFM for Fillet Weld Inspection Applications Brochure
- ACFM for Galvanized Steel Inspection Applications Brochure
- ACFM for High Temperature Inspection Applications Brochure
- Advanced Weld Inspection for Austenitic Steel Applications Brochure
- Advanced Weld Inspection for Boiler Tubes Applications Brochure
- Advanced Weld Inspection for Carbon Steel Applications Brochure
- Corrosion Mapping Applications Brochure
- High Temperature Hydrogen Attack (HTHA) Applications Brochure
- Non Intrusive Inspection Applications Brochure
- Tank Integrity Inspection Applications Brochure
- Train Axle Inspection Applications Brochure
- WeldXprt Applications Brochure
- Wet Hydrogen Sulfide Damage Applications Brochure
-
Articles
- A Comparison of the Magnetic-flux Leakage and Ultrasonic Methods
- Assessment of High Temperature Hydrogen Attack Using Advanced Ultrasonic Array Techniques
- Bandwidth of MFL in Steel Plate Inspection
- Capabilities of Modern Tank Floor Scanning with Magnetic-Flux Leakage
- Corrosion Monitoring and Thickness Measurement: What are we Doing Wrong?
- Discrimination of Top and Bottom Discontinuities with MFL STARS Technology
- Efficient Inspection from Measurement Collection to Reporting
- Factors Affecting the Defect Sizing Capabilities of Magnetic-flux Leakage
- Magnetic-flux Leakage Technology
- Improving Confidence in Tank Inspection
- Marsupial Miniature Robotic Crawler System for Camera and Sensor Deployment in Nuclear Waste Double Shell Tank Refractory Air Slots
- Overcoming the Adverse Effects of Galvanized Steel Weather Jackets
- PHMSA Strengthens Gas Pipeline Assessment Requirements by Adding Guided Wave Ultrasonic Testing as an Additional Assessment Method
- Practical Limits of MFL in Steel Plate Inspection
- Tank Assessment Depends on the Accuracy of Measurements and the Probability of Detection
- The Challenge to Asset Owners and Operators is to Use New Systems to Reduce Out-of-Service Time
- The Influence of Maintenance on the Life Cycle of Above-ground Storage Tanks
-
Études de cas
-
Conseils et astuces pour le nettoyage
-
Fiches comparatives
-
Fin de vie active
- Amigo & U31 - End of Active Life
- Amigo & U31 - End of Active Life, Calibration and Support
- Delta crawler, Magg UT and Crystal Cam - End of Active Life
- Ectane - First-Generation End of Active Life
- Ectane 2 - End of Active Life
- Floormap FM2000, VS, VS2 and VS2i - End of Active Life
- Floormap®3DiM-R, Floormap®3Di-R and Floormap®-R - End of Active Life
- Gekko rev. A and B - End of Active Life
- Handscan and Pipescan - End of Active Life
- Mantis V1
- MULTI2000 and MultiX++ - End of Active Life
- PACE - End of Active Life
- RMS - End of Active Life
- RMS ARC - End of Active Life
- RSCAN DCP - End of Active Life
- Scorpion 1 - End of Active Life
- TOPAZ 16-ZPAC
- Transition to Perpetual Licenses for Eddyfi Software
- Vacuum Boxes - End of Active Life
- ZIRCON
-
Affiches
-
Catalogues de sondes
-
Manuels d'utilisateur
- 2-Function Manipulator User Manual
- AC Powered Reel User Manual
- Actuated Probe Lift User Manual
- Amigo2 User Manual
- Battery User Manual
- CIRC-IT User Manual
- Connectivity Tools User Manual
- Ectane 3 - Manuel d'utilisateur FR
- FloormapX User Manual
- ICON Diagnostics User Manual
- ICON Portable Controller User Manual
- ICON Software User Manual
- Lyft User Manual
- LYNCS User Manual
- Magnifi 4 User Manual
- Magnifi 5 User Manual
- MICROBE User Manual
- MOTIX User Manual
- Nanomag User Manual
- Optical Guide User Manual
- Panther 2 User Manual
- Pipescan HD User Manual
- Raster Arm User Manual
- RECON User Manual
- Reddy AC and Probes User Manual
- Reddy User Manual
- ROTIX 3-Axis Nozzle User Manual
- ROTIX Reduced Width User Manual
- ROTIX User Manual
- ROTIX Weld Frame User Manual
- R-Scan Array User Manual
- Sharck G2 Pencil User Manual
- Sharck G2 User Manual
- Sharck HR User Manual
- SIMS PRO User Manual
- Sonyks User Manual
- Spyne User Manual
- STIK User Manual
- STIX Manual Flange Scanner User Manual
- STIX Manual Magnetic TOFD Scanner User Manual
- STIX Magnetic Long Seam Scanner User Manual
- STIX Magnetic Weld Frame Scanner User Manual
- Swift, Scorpion2 and R-Scan User Manual
- Tracker User Manual
- TubePro User Manual
- U41 User Manual
- Versatrax I100 and P205 User Manual
- Versatrax I150 and P320 User Manual
- Versatrax I50 User Manual
- Versatrax M310 User Manual
- Versatrax M480 User Manual
- VersaTrax Y200 User Manual
- Versatrax Y380 User Manual
-
Fiches techniques
- Amigo 2 Technical Specifications
- Capture Technical Specifications
- DefHi Technical Specifications
- Ectane 3 - Fiche technique FR
- Ectane 3 SDK Technical Specifications
- ElbowFlex Technical Specifications
- Emerald Technical Specifications
- Flextrack Technical Specifications
- FloormapX Technical Specifications
- Gekko Technical Specifications
- ICON Controllers Technical Specifications
- Lyft Technical Specifications
- LYNCS Technical Specifications
- Magnifi Technical Specifications
- Mantis Technical Specifications
- matPIMS Technical Specifications
- microPIMS Technical Specifications
- Motix Technical Specifications
- MIZ-21C Technical Specifications
- Nav2 Technical Specifications
- NDT PaintBrush Technical Specifications
- NDT Sweeper Technical Specifications
- Panther 2 Technical Specifications
- PECA HR Technical Specifications
- Pipescan HD Technical Specifications
- Quartz Technical Specifications
- Reddy Surface ECA & MFL Technical Specifications
- Remote-Field Array (RFA) Probes Technical Specifications
- SIMS PRO Technical Specifications
- smartPIMS 2.0 Technical Specifications
- Sonyks Technical Specifications
- Spectrum Technical Specifications
- Spyne Technical Specifications
- Swift & Scorpion 2 Technical Specifications
- Topaz16 Technical Specifications
- Topaz32 Technical Specifications
- Topaz64 Technical Specifications
- TubePro 6 Technical Specifications
- VersaTrax I-Series Technical Specifications
- VersaTrax M-Series Technical Specifications
- Versatrax NDT Technical Specifications
- VersaTrax P-Series Technical Specifications
- VersaTrax Y-Series Technical Specifications
- webPIMS Technical Specifications
- P-Flex Technical Specifications
- Reddy AC & Tubing Technical Specifications
- U41 Technical Specifications
-
Notes techniques
- Buried Pipeline Inspection
- Corrosion Under Insulation
- Desert Road Crossing Inspection
- Drill Riser Inspection
- Extra-large-diameter Pipeline Inspection
- Finned Tubes
- Focus+ Unique Features
- From Pipe Screening to Pipe Inspection
- Improved Inspection with 5-ring Torsional Transmission
- LRUT Inspection of Bitumen Lines
- Monitoring with High-temperature Permamount
- Pipeline Inspection and Assessment
- River Crossings
- Sphere Leg Inspection
- Wi-Fi
-
Documents techniques
- ACFM Frequently Asked Questions
- Eddyfi Ectane Firmware Update Procedure
- Gekko Technical Document
- Mantis Technical Document
- Moving From Assist 3.1 or Older to 3.3 or Newer
- Multiplexed Architecture 8x32
- Multiplexed Architecture 16x64
- Software License Activation, Update & Upgrade Instructions
- Sonyks Joined Collars S-WI-3015
- Tubing Probes Setup (for Magnifi)