Our blog highlights current news, tech tips and general advice on getting the most out of Eddyfi Technologies’ advanced solutions for NDT operations. Whether it’s our website, customer service, or our unique and ever-evolving technology, we are committed to providing you with the highest quality experience possible. We value your feedback on the content we publish – what’s worth reading and what do you wish we would talk about? We’re here, we’re listening and we’re ready to respond. Get in touch today
Get notified for new postsQuick and Simple Remote Weld Height Measurement with Inuktun Robotics
Thursday, April 2, 2020
TKY Weld Inspection Covered with Capture™ Software Tool
Tuesday, March 31, 2020
Testing at Extremes – Small Diameter Pipelines
Thursday, March 26, 2020
Capture™ Software Analysis Tools: Auto-sizing
Tuesday, March 24, 2020
See Beyond the Corrosion Scab
Friday, March 20, 2020
New Analysis Tools in Capture™
Tuesday, March 17, 2020
Dissimilar Metal Weld Inspection No Longer Difficult
Tuesday, March 10, 2020
The Next Generation of ACFM® Technology Carries the Torch
Thursday, March 5, 2020
TT or TT-TT... That is the Question
Tuesday, March 3, 2020
The Case for Caisson Inspection with Teletest Focus™
Wednesday, February 26, 2020
Time Corrected Gain (TCG) for TFM
Tuesday, February 25, 2020
What’s the Top Topology?
Thursday, February 20, 2020
Real-Time TFM A-scans Equal Real Time Savings
Monday, February 17, 2020
An Original Concept for OEMs – IM3™ Components
Thursday, February 13, 2020
The M2M Gekko® for Spacecraft Inspection – It’s Not Rocket Science
Tuesday, February 11, 2020
Blinding Results Puts PECA HR Probe in the Spotlight
Thursday, February 6, 2020
Increasing Productivity and Sensitivity with Total Focusing Method and Plane Wave Imaging
Monday, February 3, 2020
The Rolling Momentum of ACFM® in the Rail Industry
Thursday, January 30, 2020
Certifiably Better Technicians with Guided Wave Training Course
Tuesday, January 28, 2020
Improving Signal to Noise (SNR) – Frequency Selection
Thursday, January 23, 2020
ICON™ Software for Remote Visual Inspection Today… and Tomorrow
Tuesday, January 21, 2020
Capture™: The Advanced Acquisition Software that Goes Beyond
Thursday, January 16, 2020
A New Turbine ECA Inspection Solution That Won’t Bore You
Monday, January 13, 2020
When PoD Matters – Microbially Induced Corrosion (MIC)
Monday, January 6, 2020